Utilization of Free Energy for Power Supply Using Magnetic Generators in Military Operations in Remote Areas
DOI:
https://doi.org/10.64515/irdhijtans.v2i1.83Keywords:
Permanent Magnet Generator, RPM, Renewable Energy, Free EnergyAbstract
This research aims to assist the primary duties of the Indonesian Army (TNI-AD) by utilizing a magnet generator with a free energy concept as a solution for energy supply in military operations, especially in remote areas where conventional energy sources are scarce and difficult to access. The magnet generator is designed to operate at low speeds, enabling it to charge military devices efficiently. By designing, testing, and analyzing the magnet generator optimized for low-speed operation, the research aims to ensure that the generator produces energy that can
be used in remote military operation fields. The test results indicate that the generator is capable of producing high energy with an efficiency reaching 82.3% at 200 RPM. The energy produced is sufficient to charge military devices and provide a stable backup power supply. With this capability, the designed magnet generator can serve as a reliable power source to support military operations in hard-to-reach areas.
References
Articles from the Journals
Anderson, I. E., McCallum, R. W., & Tang, W. (2008). Alloy Design And Microstructure Of Advanced Permanent Magnets Using Rapid Solidification And Powder Processing. International Journal of Powder Metallurgy, 44(6).
Chen, J., Ren, Y., & Lu, G. (2024). Damage in Quasi-Brittle Materials From a Two-Scale Perspective: From Geometric Discontinuity To Free Energy Reduction. Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics, 56(11), 3202–3212. https://doi.org/10.6052/0459-1879-24-268.
Gutfleisch, O., Willard, M. A., Brück, E., Chen, C. H., Sankar, S. G., & Liu, J. P. (2011). Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient. Advanced materials, 23(7), 821-842.
Mujadin, A., Jumianto, S., Idris, A., & Isa, M. M. (2021). Prototipe Pembangkit Listrik Berkelanjutan 220VAC/50hz 300W (Free Energy). Reposity Universitas Al-Azhar Indonesia, November, 1–39. http://eprints.uai.ac.id/id/eprint/1790.
Pliego, J. R. (2024). Hybrid Cluster-Continuum Method for Single-Ion Solvation Free Energy in Acetonitrile Solvent. Journal of Physical Chemistry A, 128(31), 6440–6449. https://doi.org/10.1021/acs.jpca.4c03593.
Rahman, M. M., Selvaraj, J., Rahim, N. A., & Hasanuzzaman, M. (2018). Global modern monitoring systems for PV based power generation: A review. Renewable and Sustainable Energy Reviews, 82, 4142-4158.
Sugiarta, A., Kasiyanto, K., Widiatmoko, D., Syafaat, M., Achmad, A., & Asif, I. (2023). Technology Biomechanic-Based Design of Knee Protector Generator for Portable Electricity Generation to Support Military Operations in the Field. Jurnal Bumigora Information Technology (BITe), 5(2), 159-170.
Triana, K. B., Dantes, K. R., & Nugraha, I. P. (2019). Pengembangan Desain Free Energy Generator Berbahan Magnet Neodymium Berbasis Solidworks Untuk Sistem Recharging Prototype Ganesha Electric Generasi II Undiksha. Jurnal Pendidikan Teknik Mesin Undiksha, 7(3), 111-121.
Solomon, D. G., Greco, A., Masselli, C., Gundabattini, E., Rassiah, R. S., & Kuppan, R. (2020, February). A Review on Methods to Reduce Weight and to Increase Efficiency of Electric Motors Using Lightweight Materials, Novel Manufacturing Processes, Magnetic Materials and Cooling Methods. In Annales de Chimie Science des
Materiaux (Vol. 44, No. 1).
Widiatmoko, D., Aripriharta, A., Kasiyanto, K., Irmanto, D., & Wahyu Prasetyo, M. (2024). Power Efficiency using Bank Capacitor Regulator on Field Service Shoes with Fast Charge Method. MATRIK : Jurnal Manajemen, Teknik Informatika Dan Rekayasa Komputer, 23(2), 273–284. https://doi.org/10.30812/matrik.v23i2.3494.
Doctoral Dissertation
Rokhim, M. A., & Alfi, I. (2019). Rancang Bangun Generator Listrik Overunity Dengan
Memanfaatkan Energi Yang Tersimpan Pada Flywheel (RODA GILA) (Doctoral
dissertation, University of Technology Yogyakarta).
Proceedings
Prayogo, L. G., Dahlan, D., & Maulana, E. (2020). Analisis Energi Yang Dihasilkan Pada
Pembangkit Listrik Tenaga Magnet Dengan Konsep V-Gate. In Prosiding Seminar
Rekayasa Teknologi (SemResTek) (pp. KE11-KE21).
Published Book
Chaturvedi, D. K. (2017). Modeling and simulation of systems using MATLAB and
Simulink. CRC press.
Neuber, A. (2005). Explosively driven pulsed power: helical magnetic flux compression
generators. Springer Science & Business Media.
